1、 When using cranes and elevators, relevant regulations shall be observed and safety shall be paid attention to.
2. When adjusting the blade, wiping the blade and replacing the blade, pay special attention to the blade. When adjusting the blade, do not talk with others. At this time, do not play with others, and wear protective gloves if necessary.
3. Lè senti papye aliminyòm lan pase nan sistèm koupe Longitudinal la, men senti a - ki gen papye papye aliminyòm pral pase nan pati yo san detantè kouto pou evite ke yo grate sou lam la, epi moun k ap resevwa papye aliminyòm la dwe tou evite ke yo te grate pa lam la.
4. When the aluminum foil belt passes through the nip roll, the operator & #39;s hand leaves the nip roll.
5. When unloading, it shall leave the track of unloading truck and trolley. Before removing the scraper shaft, remove the lock nut and plug.
6. When the strip steel suddenly breaks, the guide roller runs at high speed. Only when the guide roller stops running, can the aluminum foil fragments generated after the break be cleaned.
7. When the up coiling shaft is sent to the track host machine, the operator lifts the shaft by hand and clamps it.
8. Be careful not to extend the fingertip or other parts into the coiling shaft, so as to avoid the fingers being bitten and crushed by the coiling shaft and roller when the aluminum foil needs to be drawn into the coiling shaft when pulling the belt or the bottom of the coiling shaft.
9. During operation, pay attention not to touch any guide roller and running aluminum foil, so as to avoid being scratched or bitten by the guide roller.
10. Pay attention to working hours, do not loosen clothes or carry other things that are easy to be bitten by the roller.